Author Topic: ✅WANTED: Human that knows Shape 3D in San Diego, Orange County  (Read 2880 times)

magentawave

  • Teahupoo Status
  • ******
  • Posts: 1872
    • View Profile
I have a Shape 3D file of an 8-6 that is about 75% complete but I need someone in San Diego or Orange County (I’m in Carlsbad) to do the rails and bottom. I will email you the file and bring the board to you.

This is what I need done...

1) Copy the bottom and rails of the board I will bring to you and add them to the file.

2) Save and duplicate that file and then shrink the board down to a 7-10 with the same width and thickness as the 8-6 but with a wider nose.

Please let me know what you will charge for this.

Thanks!😀

Pluto Platter: 7-10 x 29.25 x 4.25 x 114.5 liters

TallDude

  • Cortez Bank Status
  • *****
  • Posts: 5714
  • Capistrano Beach
    • View Profile
    • Email
Re: ✅WANTED: Human that knows Shape 3D in San Diego, Orange County
« Reply #1 on: April 22, 2021, 10:33:52 PM »
Another place to try is  KKLorders@gmail.com or call +1 (760) 659-0555
They are in Carlsbad. http://www.kklmachine.com/
It's not overhead to me!
8'8" L-41 ST and a whole pile of boards I rarely use.

magentawave

  • Teahupoo Status
  • ******
  • Posts: 1872
    • View Profile
Re: ✅WANTED: Human that knows Shape 3D in San Diego, Orange County
« Reply #2 on: April 22, 2021, 10:55:15 PM »
Another place to try is  KKLorders@gmail.com or call +1 (760) 659-0555
They are in Carlsbad. http://www.kklmachine.com/

I’ll call them tomorrow. Thanks!
Pluto Platter: 7-10 x 29.25 x 4.25 x 114.5 liters

magentawave

  • Teahupoo Status
  • ******
  • Posts: 1872
    • View Profile
Re: ✅WANTED: Human that knows Shape 3D in San Diego, Orange County
« Reply #3 on: April 23, 2021, 10:14:54 AM »
I called and that number is no longer in service but it’s still on their website (surfers!). Anywho, I sent an email so hopefully that will work!
Pluto Platter: 7-10 x 29.25 x 4.25 x 114.5 liters

magentawave

  • Teahupoo Status
  • ******
  • Posts: 1872
    • View Profile
Re: ✅WANTED: Human that knows Shape 3D in San Diego, Orange County
« Reply #4 on: July 05, 2021, 11:54:07 AM »
UPDATE: In case anyone needs design work done on Shape 3D or Aku Shaper, I found a guy that is really really good. His name is Nick and he was able to copy my 8-6 quite accurately. Then I had him take the 8-6 and shrink it to a 7-10 based on what I learned from the 7-11 I shaped and glassed last fall. I can’t wait to get this new 7-10 out in the water.🏄🏻‍♂️

Please PM me for Nicks contact information.
Pluto Platter: 7-10 x 29.25 x 4.25 x 114.5 liters

 


SimplePortal 2.3.7 © 2008-2024, SimplePortal