✅WANTED: Human that knows Shape 3D in San Diego, Orange County

[magentawave]

I have a Shape 3D file of an 8-6 that is about 75% complete but I need someone in San Diego or Orange County (I’m in Carlsbad) to do the rails and bottom. I will email you the file and bring the board to you.

This is what I need done...

1) Copy the bottom and rails of the board I will bring to you and add them to the file.

2) Save and duplicate that file and then shrink the board down to a 7-10 with the same width and thickness as the 8-6 but with a wider nose.

Please let me know what you will charge for this.

Thanks!😀

[TallDude]

Another place to try is  KKLorders@gmail.com or call +1 (760) 659-0555
They are in Carlsbad. http://www.kklmachine.com/

[magentawave]

Another place to try is  KKLorders@gmail.com or call +1 (760) 659-0555
They are in Carlsbad. http://www.kklmachine.com/

I’ll call them tomorrow. Thanks!

[magentawave]

I called and that number is no longer in service but it’s still on their website (surfers!). Anywho, I sent an email so hopefully that will work!

[magentawave]

UPDATE: In case anyone needs design work done on Shape 3D or Aku Shaper, I found a guy that is really really good. His name is Nick and he was able to copy my 8-6 quite accurately. Then I had him take the 8-6 and shrink it to a 7-10 based on what I learned from the 7-11 I shaped and glassed last fall. I can’t wait to get this new 7-10 out in the water.🏄🏻‍♂️

Please PM me for Nicks contact information.