How to fix the scratches on the foil

[winged surfer]

I love to keep my foils always like new, usually I pay a professionist to the the job, I never thought about the technique to use to fix the scartches, but I found this on YouTube:



This guy is using either putty with black pigmented powder and hardener or bi component epoxy.
Is that tutorial correct?
Do you guys follow other procedures?
Thanks!

[PonoBill]

Anything but really deep gouges can be visually eliminated with light sanding and spraying with matte clear rattle-can spray.



Beat to shit



Sanded



All better. No filler, no body putty, no epoxy, no rubbing compound. All three wings were equally trashed, I did them all in well less than an hour. anyone who knows me realizes I'd never spend more time than that making something pretty.

A second coat of gloss on top of the matte would make them all shiny and new-looking. I didn't bother.

[Hdip]

Looks right to me. I don't fix my wings really. Scratches don't matter.

AH Pono beat me again. My broken arm is slowing me down.

[norcom]

Anything but really deep gouges can be visually eliminated with light sanding and spraying with matte clear rattle-can spray.

All better. No filler, no body putty, no epoxy, no rubbing compound. All three wings were equally trashed, I did them all in well less than an hour. anyone who knows me realizes I'd never spend more time than that making something pretty.

A second coat of gloss on top of the matte would make them all shiny and new-looking. I didn't bother.

I keep chipping the GoFoil paint on the tips of the front/tail wings. I used to try and cover it with epoxy but have gotten lazy and just rattle them now. I’ve tried a couple of types or rattle paint; epoxy, metal and something else I think. It seems strong but then starts to chip away. Thoughts on why it’s not sticking? I’ve tried to lightly sand the areas so the paint sticks but it doesn’t seem to make much difference unless I do epoxy.

[PonoBill]

That goFoil paint is really tough stuff, but it's hard to get anything to stick to it.

[Phils]

Bill, what grit sandpaper?  Do you use just one or a series?

[PonoBill]

120 then 220