Author Topic: Gofoil 6.5 Pedestal and 14.5" Tail  (Read 1292 times)

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Gofoil 6.5 Pedestal and 14.5" Tail
« on: June 26, 2020, 02:27:42 PM »
Ordered the GoFoil 6.5" Pedestal and 14.5" Tail and after one session, I am so jazzed on this combo!!! 

The 14.5" Tail fills all the gaps I was looking for in a GoFoil tail--pumps like the 18N, tracks like the Maliko and carves closer to the Kai.  I was afraid that moving from the 9" to the 6.5" pedestal (GoFoil's equivalent to moving to a short fuselage) would be like learning to foil all over again but after a couple of waves to get used to it, I found that I was able to throw turns that I haven't been able to before without the added twitchiness I was expecting.  Had to adjust pump frequency and carve to stay up high on the foil but it is oh so fun... If anyone is considering this combination, to me it is a gamechanger!


Velasco

  • Rincon Status
  • ***
  • Posts: 242
    • View Profile
    • Email
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #1 on: June 27, 2020, 12:27:29 AM »
What front wing is that?  GL180 or 140?  How much do you weigh?

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #2 on: June 27, 2020, 08:08:51 AM »
What front wing is that?  GL180 or 140?  How much do you weigh?

I weigh ~182lbs.  GL180 on a 6'x28x115L Kalama E1.  Pretty much the only wing I use right now.  I thought of picking up a GL140 for the bigger winter swells here but then the shelter-in-place orders came so will have to look at the smaller NL next winter.

jondrums

  • Peahi Status
  • *****
  • Posts: 519
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #3 on: June 27, 2020, 10:49:30 PM »
I haven't been happy with mine.  The tail required a bunch of modification to get it to sit straight since the holes were drilled crooked.  The pedestal itself is obviously handmade and wasn't really shaped to fit the tail so I think the angle isn't set right.  I tried a variety of washers and shims but gave up after since it never rode right. 

steamroller

  • Peahi Status
  • *****
  • Posts: 883
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #4 on: June 28, 2020, 01:28:03 AM »
sorry  to hear about your troubles jondrums...yes they are handmade maybe you just got a weird one...hopefully they'll make it right...the 6.5 was a total game change for me too...way better pumping  turning  carving everything....the 29.5 mast with the plate adapter GL180 and the 6.5 is THE hot setup.....for now....

NJkiter

  • Waikiki Status
  • *
  • Posts: 8
    • View Profile
    • Email
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #5 on: June 28, 2020, 04:35:32 AM »
I’m with Jondrums. Same issues with pedestal -  My experience with the new pedestal is not of “game changer” status. It’s definitely improved turning performance and I am grateful for the upgrade despite the issues. However, I love the 14.5 tail.
Me:5’11” (170cm) 160lbs (73kg) Age:61
Wings: Duotone Echo 4m,5m,6m
SUP Foil Board: Blue Planet 6’6” 117 liters
Quatro Drifter 5’4” 90 liter wing board
Foils: Go Foil Kia, Iwa, M200,
GL100,140,210 & NL190
Paddle:Wener Rip Stick

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #6 on: June 28, 2020, 05:31:07 AM »
Wow--I guess I got lucky with my handmade one then!  Hopefully the production ones that come out in July fix the issues you have had... maybe Alex will swap the ones that you both got especially since the custom ones were sold at a premium cost?
« Last Edit: June 28, 2020, 05:32:57 AM by 805StandUp »

jondrums

  • Peahi Status
  • *****
  • Posts: 519
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #7 on: June 28, 2020, 08:33:54 AM »
If anyone could recommend the appropriate angle for the tail, that might be helpful.  Or perhaps a good photo from the side showing the angle of the tail.   I'd be psyched to give it another shot

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #8 on: June 28, 2020, 02:29:34 PM »
If anyone could recommend the appropriate angle for the tail, that might be helpful.  Or perhaps a good photo from the side showing the angle of the tail.   I'd be psyched to give it another shot

Not sure if this will help but I tried to line up with a wall as guide though I do think the street angles slightly downward...


Califoilia (formerly - SanoSlatchSup)

  • Teahupoo Status
  • ******
  • Posts: 1241
  • San Clemente
    • View Profile
    • Email
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #9 on: June 28, 2020, 05:36:34 PM »
So how or where do you get your hands on a set of those (14.5 tail & pedestal)?
Me: 6'1"/185...5'7" Kings Foil Board...6'0" Kings Foil Board...9'6" Bob Pearson "Laird Noserider"...9'6" Costa Azul Wide Body...14' Lahui Kai "Manta"...8'0" WaveStorm for when proning urges still hit, and 7'3" Chuck Glynn foil board backup.

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #10 on: June 29, 2020, 12:04:01 PM »
@jondrums - nice meeting you foiling today--was a surprise!

@sano - Word is that the production versions come out in July.  If you want it sooner, you may be able to get a handmade one directly from Maui (e.g. Gofoil or shops there)--you do pay a premium for the handmade one.  I will message you the shop I got it in case they still have inventory.

jondrums

  • Peahi Status
  • *****
  • Posts: 519
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #11 on: June 29, 2020, 12:14:13 PM »
Hilarious that we crossed paths a day after you did me the favor to take a picture of your setup.  Thanks for doing that - I know it takes time but it is helpful to try and get a sense for the right angle.  See you out there tomorrow again I'm sure.

Califoilia (formerly - SanoSlatchSup)

  • Teahupoo Status
  • ******
  • Posts: 1241
  • San Clemente
    • View Profile
    • Email
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #12 on: June 29, 2020, 12:58:49 PM »
@jondrums - nice meeting you foiling today--was a surprise!

@sano - Word is that the production versions come out in July.  If you want it sooner, you may be able to get a handmade one directly from Maui (e.g. Gofoil or shops there)--you do pay a premium for the handmade one.  I will message you the shop I got it in case they still have inventory.
I got the PM, and thanks for the info. From what I'm reading, I think I might just wait for July to get the production version that hopefully has all of the kinks worked out of them, and there'll be a bit more consistency in what one's buying as far as the angle of the dangles go and all.

Actually, I'm really just a cheapskate, and if I can get a nickel off on something for waiting a couple weeks I'm taking it!  ;) ;D
Me: 6'1"/185...5'7" Kings Foil Board...6'0" Kings Foil Board...9'6" Bob Pearson "Laird Noserider"...9'6" Costa Azul Wide Body...14' Lahui Kai "Manta"...8'0" WaveStorm for when proning urges still hit, and 7'3" Chuck Glynn foil board backup.

805StandUp

  • Sunset Status
  • ****
  • Posts: 355
    • View Profile
Re: Gofoil 6.5 Pedestal and 14.5" Tail
« Reply #13 on: June 29, 2020, 04:41:53 PM »

I got the PM, and thanks for the info. From what I'm reading, I think I might just wait for July to get the production version that hopefully has all of the kinks worked out of them, and there'll be a bit more consistency in what one's buying as far as the angle of the dangles go and all.

Actually, I'm really just a cheapskate, and if I can get a nickel off on something for waiting a couple weeks I'm taking it!  ;) ;D

Based on what I am reading here, a wise choice... and if it will save you $70+ even more so!

 


* Recent Posts

post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Phils
Today at 04:38:53 AM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Admin
Today at 02:34:34 AM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
headmount
January 18, 2021, 09:06:54 PM
post Re: Dart
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
daswusup
January 18, 2021, 07:34:34 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Califoilia (formerly - SanoSlatchSup)
January 18, 2021, 07:30:09 PM
post Re: I forgot how much fun it is...
[General Discussion]
PonoBill
January 18, 2021, 06:53:46 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
PonoBill
January 18, 2021, 06:49:21 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Phils
January 18, 2021, 04:39:03 PM
post Re: Dart
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Phils
January 18, 2021, 04:26:37 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Dwight (DW)
January 18, 2021, 03:40:10 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
flkiter
January 18, 2021, 03:26:54 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Phils
January 18, 2021, 02:07:07 PM
post Re: I forgot how much fun it is...
[General Discussion]
Caribsurf
January 18, 2021, 02:04:13 PM
post Re: Fricking drooling over an electric motorcycle...
[Random]
Wetstuff
January 18, 2021, 01:39:47 PM
post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
PonoBill
January 18, 2021, 12:24:20 PM
SimplePortal 2.3.7 © 2008-2021, SimplePortal