Author Topic: I made a little 'Crawler'.  (Read 462 times)

Wetstuff

  • Teahupoo Status
  • ******
  • Posts: 1883
    • View Profile
    • Wetstuff
I made a little 'Crawler'.
« on: March 24, 2020, 10:37:12 AM »
Actually, Hank, a friend who builds roll cages and mods for race cars 'built' it.  I first ordered parts in 2017; he is a busy guy, atop running a towing company. I have a couple of acres of Pfragmities that sorta wrecks my view.  This is the second 'vehicle' we have built to mount an attack on these buggers.   

Jim

Atlantis Mistress .. Blue Planet MultiTasker ..   Atlantis Venom

TallDude

  • Cortez Bank Status
  • *****
  • Posts: 5107
  • Capistrano Beach
    • View Profile
    • Email
Re: I made a little 'Crawler'.
« Reply #1 on: March 24, 2020, 12:57:00 PM »
I guess it's a little more environmentally sensitive than Roundup, but not much. Safer for you, for sure ;D  Looks like fun! Whats the hp? 
It's not overhead to me!
8'8" L-41 ST and a whole pile of boards I don't use.

deepmud

  • Peahi Status
  • *****
  • Posts: 543
    • View Profile
    • Email
Re: I made a little 'Crawler'.
« Reply #2 on: March 24, 2020, 03:18:28 PM »
That is really cool. Too bad you can't run it on snow :D

I had to read up on the Phragaties - looks like a tough weed. Sad it destroys ecosystems - like a pike - takes over, nothing else lives.

surfcowboy

  • Cortez Bank Status
  • *****
  • Posts: 3789
    • View Profile
Re: I made a little 'Crawler'.
« Reply #3 on: March 24, 2020, 07:44:17 PM »
Oh man, this is insane. I love it. What implements do you use behind it?

Dusk Patrol

  • Peahi Status
  • *****
  • Posts: 846
  • PNW
    • View Profile
    • Email
Re: I made a little 'Crawler'.
« Reply #4 on: March 24, 2020, 08:59:31 PM »
What implements do you use behind it?

...or do you simply CRUSH them under those awesome tracks...
Bullet V2; RS 14x26; JL Destroyer 9'8; BluePlanet 9'4

Wetstuff

  • Teahupoo Status
  • ******
  • Posts: 1883
    • View Profile
    • Wetstuff
Re: I made a little 'Crawler'.
« Reply #5 on: March 25, 2020, 06:20:16 AM »
Ya, you're right TD.  Roundup is beyond nasty. The best tool for most weeds is a machete.  In the early days, the State would reimburse if you used an approved contractor. I gather the State spent millions.  (some trappers will 'accidently' start fires you can smell for miles)

We never used chems.  I hacked at them and tried another small, wheeled-trimmer - too much work. Then, I built #1. (below)  It was fun, hydro-driven, articulated, etc. but too narrow and would throw me off when it fell into a hole. (a bitch to right, but lotta fun)

This was easy because zero-turn mowers have really evolved and aged to the point of becoming surplus. I have had this 12-15hp motor sitting in a container for 15yrs..?  The original engine was 20+hp, but this is hydro+chain-driven and does not seem to lug under load when we first tested it.  We tried it on an embankment: it is spooky as C'hit coming downhill but settles on the front rise and ...keeps coming down.

Dusky got it... 'Crush the _____'ers!'   I tried a massive black cover over new shoots after hacking them once - thinking 'They need Sun.' Nope.  They simply need to be folded over (they are hollow). New ones will grow soon.  I will be able to test at which sage in their growth I can actually tell if I can deter that growth.

Cowboy, we may end up adding a 'lawn roller' to the front. (based on how well #1 worked)  I may also need to add a roller that looks like a paper towel dispenser.  I have a few rolls of 6x450', very heavy mesh that would work like WWII landing mats for the really boggy areas. I do have an electric winch I can move front or back to help extract it if needed. It's fun.  Marjie would prefer I finish the trim in the bathroom...

Jim


Atlantis Mistress .. Blue Planet MultiTasker ..   Atlantis Venom

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 23119
    • View Profile
Re: I made a little 'Crawler'.
« Reply #6 on: March 25, 2020, 07:53:45 AM »
Both projects are cool as hell. Something I might have built if there was a Pfragmitie someplace accessible.

I can't help but think that a robot or a bunch of robots would do the job better though. Easy to build with the tech available today. The concept would be a lot like robot lawnmowers, which are never heavy-duty mowers, they just need to mow all the time. I had one years ago at my home in Portland, and it worked well once the lawn was under control. I'd see it outside, mowing away on grass that looked perfectly mowed. Taking off perhaps a 16th of an inch of new growth, which means the clippings dried to dust in a single day. Mulching without clumps. Mine found it's way to the charger whenever the battery got low, which was fairly often given that my lawn was as steep as a cow's face. That was a problem since the slope dropped away from the house and keeping the cable to the charger short was necessary if I wasn't going to dig a few hundred yards of ditch. Struggling up the hill with a low battery sometimes meant it didn't reach the charger and lead to its retirement, which it's spending in the weird bunker room under my garage in Hood River. These days I'd power the charger with a few PV cells and a good-sized battery and put it at the best position instead of the shortest cable run. The lawnbot mowed randomly but was constrained by an eFence. I'd do it with GPS today. I'd shoot for something light and cheap and I'd build a few.

I think I just talked myself into a robot lawn mower project. Oh, great.
« Last Edit: March 25, 2020, 07:58:03 AM by PonoBill »
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

deepmud

  • Peahi Status
  • *****
  • Posts: 543
    • View Profile
    • Email
Re: I made a little 'Crawler'.
« Reply #7 on: March 25, 2020, 10:47:26 AM »
so - if you beat it down enough, long enough - is there a native plant that can survive the crushing and win out? Your tarp idea might sterilize for awhile....

Wetstuff

  • Teahupoo Status
  • ******
  • Posts: 1883
    • View Profile
    • Wetstuff
Re: I made a little 'Crawler'.
« Reply #8 on: March 25, 2020, 11:23:15 AM »
Thanks, Bill...  I looked into that a few years ago.  Even as a walk-behind with a joystick that some crane operators use. We were considering a monster weedwhacker then, but... this 'zero-turn' tech begged us to use it. (when the price came down)  When folded-at-the-base the stalks makes a carpet so you don't need all that flying c'hit and clogs.

mud... I used the typical mesh you see as ground covering at nurseries.  Over the weeks it looked like time-lapse photography of the erection of a circus tent. I tried throwing stuff on it to hold it - eh-eh.  It was a mess.

Jim
Atlantis Mistress .. Blue Planet MultiTasker ..   Atlantis Venom

 


* Recent Topics

topic Jon Boat Tow Foil - for the country folks
[The Shape Shack]
Dusk Patrol
Today at 01:15:17 PM
topic Flat water 4 in 1
[Flatwater and Touring]
Dusk Patrol
Today at 01:09:55 PM
topic My experience with the Starboard Ace GT unlimited, and now I'm thinking custom.
[Gear Talk]
robon
Today at 01:08:13 PM
topic COVID-19 Data Model Updated Daily
[Random]
Beasho
Today at 11:40:49 AM
topic Wing Foil tips for beginners- voiceover video
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
blueplanetsurf
Today at 10:44:33 AM
topic Slightly off topic- Windfoil board construction ?
[The Shape Shack]
peterwSUPr
Today at 10:18:52 AM
topic The Fed's Losing Battle with Deflation (w/ Jeff Booth)
[Random]
Quickbeam
Today at 10:14:22 AM
topic Robert at Blue Planet has face masks...
[Random]
Wetstuff
Today at 10:05:25 AM
topic Leash points for 14 ft board
[The Shape Shack]
tarquin
Today at 09:50:09 AM
topic Manhattan Beach surfer issued $1,000 citation for violating beach closure order
[Random]
Wetstuff
Today at 09:40:38 AM
topic Lite wind foiling and adapting to the current Covid-19 world?
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Admin
Today at 08:50:51 AM
topic New Naish S25 Wing-Surfer
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Dwight (DW)
Today at 06:33:03 AM
topic Knee start vs sink start
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
biggins
Today at 02:29:16 AM
topic Anyone Want To Try This On A Wing???
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Solent Foiler
March 28, 2020, 11:46:07 PM
topic Duotone 5m/4m wings, Blue Planet Carver 58
[Classifieds]
obxDave
March 28, 2020, 05:43:33 PM