Author Topic: Hollow 14ft sup  (Read 92112 times)

burchas

  • Custom Built
  • Cortez Bank Status
  • *****
  • Posts: 2508
    • View Profile
    • Email
Re: Hollow 14ft sup
« Reply #60 on: May 23, 2020, 05:45:45 AM »
Don't paint it! I would paddle a board that looks like that in a second. Nicely done.

+1. It will stand out for sure. Very special. (maybe save a pound or two on weight?)
in progress...

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #61 on: May 23, 2020, 07:21:30 AM »
Dont worry no intention of painting it.

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #62 on: May 24, 2020, 10:33:17 AM »
Got it wet!!
 Short paddle. Didn't snap in half, didn't sink. All good.
 Seemed plenty stable and tracked well. Calm but there were lots of boats about so a bit choppy. Still a little swell from the breeze and paddling with it the board had that feeling it wanted to go. Stood a bit too far fwd and buried the nose and tracked straight. Surprising how little chop it takes to come over the bow. Dosnt come back into the standing area though. Standing area seems to drain ok when water does get in there. When I'm not standing on the drain holes! Really like the recessed standing area and being able to push the sides of your feet against the vertical part. Need to get some pad! Bit slippery!
 

burchas

  • Custom Built
  • Cortez Bank Status
  • *****
  • Posts: 2508
    • View Profile
    • Email
Re: Hollow 14ft sup
« Reply #63 on: May 24, 2020, 11:53:37 AM »
Super 8) Congrats. What’s the weight on this newborn?
in progress...

SupSimcoe

  • Rincon Status
  • ***
  • Posts: 107
    • View Profile
    • SimcoeSup
    • Email
Re: Hollow 14ft sup
« Reply #64 on: May 24, 2020, 03:35:24 PM »
Great job. Nothing like paddling something you designed and built
SUP Lake Simcoe
Clearwood VLZ 14*23 hollow wood- self-built
Starboard 2021 Sprint 14*19.75
Kenalu Mana 82
Quickblade UV 82 Carbon
SUP Reviews  http://simcoesup.blogspot.ca/

TallDude

  • Cortez Bank Status
  • *****
  • Posts: 5714
  • Capistrano Beach
    • View Profile
    • Email
Re: Hollow 14ft sup
« Reply #65 on: May 24, 2020, 03:47:13 PM »
Looks great! Just in time for summer... 8)
It's not overhead to me!
8'8" L-41 ST and a whole pile of boards I rarely use.

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #66 on: May 24, 2020, 10:31:56 PM »
Turned out pretty heavy. About 13.5 kgs. I think it's just under 14. Not too happy about that. Didn't do a final weigh. Last time I weighed it was before the handle went in and final coat of epoxy.

SupSimcoe

  • Rincon Status
  • ***
  • Posts: 107
    • View Profile
    • SimcoeSup
    • Email
Re: Hollow 14ft sup
« Reply #67 on: May 25, 2020, 05:54:33 AM »
My paulownia board is 17.6kg with deck pad but it’s way overbuilt
SUP Lake Simcoe
Clearwood VLZ 14*23 hollow wood- self-built
Starboard 2021 Sprint 14*19.75
Kenalu Mana 82
Quickblade UV 82 Carbon
SUP Reviews  http://simcoesup.blogspot.ca/

burchas

  • Custom Built
  • Cortez Bank Status
  • *****
  • Posts: 2508
    • View Profile
    • Email
Re: Hollow 14ft sup
« Reply #68 on: May 25, 2020, 07:09:02 AM »
13-14 KG is not bad all things considered. Especially if the construction is bomber? Not ideal for racing but other than that pretty good.
in progress...

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 25859
    • View Profile
Re: Hollow 14ft sup
« Reply #69 on: May 25, 2020, 08:01:40 AM »
Take a look at RSPRO's hexapad, especially the cork version. It would look great on that board and the weight is a fraction of traditional pads.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #70 on: May 25, 2020, 09:18:02 AM »
I have used hexapad or equivalent but found it uncomfortable for longer paddles. I plan to use cork. I have loads left from other boards I've built. I just couldn't wait to get it on the water.
 

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 25859
    • View Profile
Re: Hollow 14ft sup
« Reply #71 on: May 25, 2020, 10:29:41 AM »
I generally use a small pad where my feet go usually and then hexatraction elsewhere. I've found hexatraction holds wax as long or longer than a waxed pad, which means I wax them once and then never again until I notice my feet slipping--which so far is never. I wish I didn't have a standard pad on my flying dutchman foil board, I'm sure it's adding a few pounds when it's wet.

The Hexatraction cork panels feel much better than the standard ones. I figure on using them together on boards, with the cork ones where my feet usually go and standard elsewhere. I "designed" a six-pointed star pattern that I planned to make a die to cut cork. The idea was to have a cool pattern that interleaved. The day before I planned to make the die the Hexatraction cork pads came out and I shelved the project and bought two packages. Other than standing on them to test how they feel (good) I haven't had occasion to do anything with them.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #72 on: May 25, 2020, 10:55:33 AM »
I'd like to have a small CNC router to do woodwork and cork pads. One day.
 I tried to convince a company I buy rolls of cork from in Portugal to start making eco pads for surfboards and SUPs ages ago. They weren't interested. I have different densities and thickness. The lower density stuff is obviously softer and more comfortable but falls apart easier and dosnt last as long.
 My daughter loves her cork decked board.

tarquin

  • Sunset Status
  • ****
  • Posts: 370
    • View Profile
Re: Hollow 14ft sup
« Reply #73 on: June 04, 2020, 10:58:55 AM »
Not a great shot. Main cork pad done. A little strip on the vertical where my foot rubs as well.
 I will paddle it some more and add bits where I need them.
 

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 25859
    • View Profile
Re: Hollow 14ft sup
« Reply #74 on: June 04, 2020, 02:25:50 PM »
I'd like to have a small CNC router to do woodwork and cork pads. One day.

I bought one of the Sainsmart routers to play around with and gave it to my grandson after i'd played around w bit. 269 bucks. I think they even have a cheaper one. Really good design, easy to build, easy to use. You can add a laser module for cutting and engraving for another 150 bux.

https://www.sainsmart.com/products/sainsmart-genmitsu-cnc-router-pro-diy-kit
« Last Edit: June 04, 2020, 02:28:27 PM by PonoBill »
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

 


* Recent Posts

post Re: GPT 5, Sam Altman, What's coming
[Random]
PonoBill
March 17, 2024, 05:30:44 PM
post Re: 2024 North Mode Pro wings:
[Classifieds]
cnski
March 17, 2024, 05:09:04 PM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
burchas
March 17, 2024, 08:50:00 AM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
Night Wing
March 16, 2024, 07:02:05 PM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
blueplanetsurf
March 16, 2024, 03:28:57 PM
post Re: GPT 5, Sam Altman, What's coming
[Random]
LaPerouseBay
March 14, 2024, 12:38:42 PM
post Re: GPT 5, Sam Altman, What's coming
[Random]
LaPerouseBay
March 13, 2024, 07:59:28 PM
post Re: FS - Ocean Rodeo Glide A-Series Wings (3m/ 4m / 5m), USA
[Classifieds]
StellaBlu
March 12, 2024, 07:27:21 AM
post FS - Kalama Barracuda
[Classifieds]
VB_Foil
March 11, 2024, 05:43:58 PM
post Re: Vision Pro
[Random]
Bean
March 11, 2024, 03:46:42 PM
post Re: Vision Pro
[Random]
PonoBill
March 09, 2024, 11:06:32 AM
post Happy International Women's Day, lady zoners!
[General Discussion]
LaPerouseBay
March 08, 2024, 07:28:47 PM
post Re: Vision Pro
[Random]
Admin
March 08, 2024, 04:45:53 AM
post Re: Vision Pro
[Random]
PonoBill
March 06, 2024, 11:00:24 PM
post Re: Vision Pro
[Random]
Admin
March 06, 2024, 10:15:55 AM
SimplePortal 2.3.7 © 2008-2024, SimplePortal