Author Topic: Electric Surf Vehicles in 2020  (Read 142499 times)

Admin

  • Administrator
  • Cortez Bank Status
  • *****
  • Posts: 5907
    • View Profile
    • StandUpZone
    • Email

clay

  • Teahupoo Status
  • ******
  • Posts: 1027
    • View Profile
    • www.clayisland.com
    • Email
Re: Electric Surf Vehicles in 2020
« Reply #241 on: February 07, 2021, 10:06:46 AM »
I cracked up watching this, love Will Ferrill:

https://youtu.be/mdsPvbSpB2Y
Aloha, I welcome and appreciate all responses of positivity and good feeling.

YouTube: https://www.youtube.com/channel/UCOIE6FWr1SpWvbPJIIiEgog

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 24434
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #242 on: February 07, 2021, 01:50:19 PM »
Sandy Monroe is a tough old bird, I've been watching his videos for years. He was brutal on the fit and finish of the Model 3 (justifiably) and on how all Tesla's were manufactured--until Tesla started doing their massive castings. Now he's a total fanboy. With good reason. Tesla isn't just revolutionizing how cars are powered, they'll soon be able to build cars for much less than what ICEs cost. The smug dudes on the Autoweek vBlog are still spouting the same nonsense--but the truth is they don't know what hit them, and they are never going to know. Roadkill.

Elon's rap about MBAs is priceless too, though I think the days of people with MBAs parachuting into senior roles was over some time ago.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

headmount

  • Cortez Bank Status
  • *****
  • Posts: 5679
    • View Profile
    • Email
Re: Electric Surf Vehicles in 2020
« Reply #243 on: March 22, 2021, 06:26:09 PM »
Sandy Monroe is a tough old bird, I've been watching his videos for years. He was brutal on the fit and finish of the Model 3 (justifiably) and on how all Tesla's were manufactured--until Tesla started doing their massive castings. Now he's a total fanboy. With good reason. Tesla isn't just revolutionizing how cars are powered, they'll soon be able to build cars for much less than what ICEs cost. The smug dudes on the Autoweek vBlog are still spouting the same nonsense--but the truth is they don't know what hit them, and they are never going to know. Roadkill.

Elon's rap about MBAs is priceless too, though I think the days of people with MBAs parachuting into senior roles was over some time ago.
My sister just bought the lowest end Tesla.  Wow.  So good.

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 24434
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #244 on: March 23, 2021, 06:24:36 AM »
I'm still considering a Model Y or an old used Model S in advance of the Cybertruck. Once I sell my race car and Nero, the airstream car hauler I won't have much need for my F350. But I'll probably just hang onto it until I get my monster solar installation done at the shop. I'm going to make the shop self-contained for power. It will be a fun project.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

Dusk Patrol

  • Peahi Status
  • *****
  • Posts: 985
  • PNW
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #245 on: April 02, 2021, 03:40:13 PM »
I sold a board to a guy who arrived in a sleek glass topped Tesla S, with no apparent way to carry a board.
He said Tesla racks cannot be fitted to Tesla’s glass roofs, and he hauled out some Sea Sucker vacuum operated suction cup racks. I would be nervous but he has used them for a couple of years now with confidence.
Interestingly the only issue is over mountain passes the pressure differential requires him to pump out some additional air.  Just took him at his word on that. But they looked pretty slick. 
Bullet V2; RS 14x26; JL Destroyer 9'8; BluePlanet 9'4

Tom

  • Cortez Bank Status
  • *****
  • Posts: 2936
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #246 on: April 02, 2021, 04:17:36 PM »
A friend of mine has been using sea suckers on his Chevy bolt for a couple of years without any problems. He usually carries one or two bagged long boards on the freeway. His only complaint is they cannot be locked in place so he often takes them off and put them inside his car while surfing. It only takes a couple of minutes.

FRP

  • Bob
  • Sunset Status
  • ****
  • Posts: 431
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #247 on: April 02, 2021, 05:20:29 PM »
I sold a board to a guy who arrived in a sleek glass topped Tesla S, with no apparent way to carry a board.
He said Tesla racks cannot be fitted to Tesla’s glass roofs, and he hauled out some Sea Sucker vacuum operated suction cup racks. I would be nervous but he has used them for a couple of years now with confidence.
Interestingly the only issue is over mountain passes the pressure differential requires him to pump out some additional air.  Just took him at his word on that. But they looked pretty slick.

Weird. As far as I know Tesla Ss can accommodate a roof rack. I know my T3 can and the installation is reported to be easy. The roof is designed for a rack to be installed.  https://shop.tesla.com/product/model-s-roof-rack---glass-roof
We see quite a few surf boards on top of Teslas here in Tofino.

Bob
Sunova 8'10" Speeed
Sunova 8’7” Creek
KeNalu Konihi 84 (primary paddle)
Kialoa Pipes II
Werner Nitro Carbon

"The time spent surfing is time that is added to my life" “In the ocean we are all connected”
Anon

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 24434
    • View Profile
Re: Electric Surf Vehicles in 2020
« Reply #248 on: April 02, 2021, 10:29:59 PM »
Some have the cool little inserts, some don't. My wife's 2014 had them. Her 2019 doesn't. I'd be more irritated about that but she won't let me touch it anyway. Smart lady.

If I had one that didn't have mounts I'd weld some on. See above to see why that won't happen to the one "we" own.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

 


SimplePortal 2.3.7 © 2008-2021, SimplePortal