Author Topic: OAM Boehne Blur Pad  (Read 17947 times)

eastbound

  • Cortez Bank Status
  • *****
  • Posts: 2930
    • View Profile
Re: OAM Boehne Blur Pad
« Reply #15 on: September 03, 2019, 04:17:39 AM »
i see you added a center strip for more width, too, gzas

pics to come
Portal Barra 8'4"
Sunova Creek 8'7"
Starboard Pro Blue Carbon  8'10"
KeNalu Mana 82, xTuf, ergoT

gzasinets

  • Sunset Status
  • ****
  • Posts: 322
    • View Profile
    • Email
Re: OAM Boehne Blur Pad
« Reply #16 on: September 03, 2019, 06:07:18 AM »
Eastbound, the two small pieces that come with the pad - I just split them and used for the strips in the center. Donít like any bold spots in the middle of the board.
SIC Bullet 17.4 V1
SIC F16 V1
SIC Bullet 14V2
2018 Infinity Downtown 14x25 flat deck

GoFoil Iwa, M200, M280
JL Flying V 6.5
Duotone Foil Wing 5m

JL SuperTech 8.8
JL Kwad 9.1
2016 Imagine Icon 9.6 W

Cronin LB 9.4
Bunch of QB & Kenalu Paddles

eastbound

  • Cortez Bank Status
  • *****
  • Posts: 2930
    • View Profile
Re: OAM Boehne Blur Pad
« Reply #17 on: September 03, 2019, 08:56:54 AM »
and, in theory, one's front foot should be middle of the board

pad does err on the grippy side

not an issue. in fact, might make other pads feel slippery once im used to the oam
Portal Barra 8'4"
Sunova Creek 8'7"
Starboard Pro Blue Carbon  8'10"
KeNalu Mana 82, xTuf, ergoT

805StandUp

  • Sunset Status
  • ****
  • Posts: 299
    • View Profile
Re: OAM Boehne Blur Pad
« Reply #18 on: September 04, 2019, 08:22:55 AM »
Same pic from the other thread but here is how I installed the pad.  On this board no issue with the pad not going all the way to the edges since my feet stay pretty centered but it is a very reactive board.  (8'10x29).  I used the strips for the front of the pad.

I like the grippiness--have had the board almost 50 degrees sideways to the surface of the water and was able to recover!

« Last Edit: September 04, 2019, 08:24:57 AM by 805StandUp »