Author Topic: Axis Foils  (Read 401960 times)

Admin

  • Administrator
  • Cortez Bank Status
  • *****
  • Posts: 6443
    • View Profile
    • StandUpZone
    • Email
Re: Axis Foils
« Reply #90 on: November 14, 2019, 06:22:35 AM »
I need to sell my standard fuselage and go all short.

We just got two of the new short ones and they are awesome.  The head is entirely milled out.  There is a little milling on the tail.  The mast pedestal has been completely removed.  The new mast attachment point on the fuselage is female.  The doodad is highly milled and has a Gene Simmons tongue.  They took off a surprising amount of material over the old style.  These are nice and light in hand.  This is going to be awesome with the new carbon masts. 

exiled

  • Peahi Status
  • *****
  • Posts: 533
    • View Profile
Re: Axis Foils
« Reply #91 on: November 14, 2019, 09:14:34 AM »
If I just order from the axis site am I going to get a new style fuselage or are they still selling the outdated ones?

Admin

  • Administrator
  • Cortez Bank Status
  • *****
  • Posts: 6443
    • View Profile
    • StandUpZone
    • Email
Re: Axis Foils
« Reply #92 on: November 14, 2019, 09:39:32 AM »
If I just order from the axis site am I going to get a new style fuselage or are they still selling the outdated ones?

It don't think that you would get this style.  I am not sure if the older style is discontinued or if they are keeping both.

Dwight (DW)

  • Cortez Bank Status
  • *****
  • Posts: 4780
    • View Profile
    • supSURFmachines
Re: Axis Foils
« Reply #93 on: November 14, 2019, 12:54:09 PM »
With my last order, they sent 2019 standard fuse and 2020 short fuse. When 2019 stock is gone, 2020 ships. So you’re safe with a short fuse order.


exiled

  • Peahi Status
  • *****
  • Posts: 533
    • View Profile
Re: Axis Foils
« Reply #94 on: November 14, 2019, 01:38:46 PM »
I was hoping to order a 2020 ultra short. I want the option to switch to carbon later. Hmm

flkiter

  • Sunset Status
  • ****
  • Posts: 321
    • View Profile
    • Email
Re: Axis Foils
« Reply #95 on: November 14, 2019, 02:55:26 PM »
The 2020 fuselage takes the dodad to be used in the metal mast. If you're going carbon, it'll attach directly.

soepkip

  • Rincon Status
  • ***
  • Posts: 219
    • View Profile
Re: Axis Foils
« Reply #96 on: November 14, 2019, 11:02:38 PM »
The new S1010 wing is 1010 mm wingspan ;D and projected area is 1430 cm^2

The amazing thing is that the actual area also is 1430^2 ...

https://docs.google.com/spreadsheets/d/17xbTGEWSVeRhnYb_4vz_Gmby8UnrDys7Q1iB-6rC6F4/edit?usp=sharing

The S1000 is 1310/1388.
So the S1010 is not much bigger than the S1000 and a lot flatter aka completely flat

There is also a new 460 rear wing coming that also seems to be completely flat

Dwight (DW)

  • Cortez Bank Status
  • *****
  • Posts: 4780
    • View Profile
    • supSURFmachines
Re: Axis Foils
« Reply #97 on: November 16, 2019, 04:49:46 AM »
This looks like the 101 wing with 460 tail.


bigmtn

  • Rincon Status
  • ***
  • Posts: 191
    • View Profile
Re: Axis Foils
« Reply #98 on: November 16, 2019, 11:44:34 AM »
What's the info on the 880 wing?? How's it compare to the 900 or the 920/820?  Haven't seen any pics or really any info about it. Is it high aspect?

Dwight (DW)

  • Cortez Bank Status
  • *****
  • Posts: 4780
    • View Profile
    • supSURFmachines
Re: Axis Foils
« Reply #99 on: November 16, 2019, 12:39:51 PM »
880 is surf performance series. Same as the 660 photos posted here

Admin

  • Administrator
  • Cortez Bank Status
  • *****
  • Posts: 6443
    • View Profile
    • StandUpZone
    • Email
Re: Axis Foils
« Reply #100 on: December 16, 2019, 04:11:47 AM »
The new S1010 wing is 1010 mm wingspan ;D and projected area is 1430 cm^2

The amazing thing is that the actual area also is 1430^2 ...

https://docs.google.com/spreadsheets/d/17xbTGEWSVeRhnYb_4vz_Gmby8UnrDys7Q1iB-6rC6F4/edit?usp=sharing

The S1000 is 1310/1388.
So the S1010 is not much bigger than the S1000 and a lot flatter aka completely flat

There is also a new 460 rear wing coming that also seems to be completely flat

Some interesting updates on the 1010 here https://www.seabreeze.com.au/forums/Stand-Up-Paddle/Foiling/Axis-101?page=1#14 .  More area than the 1000 but the lowest of the 3 in volume.

S1000 area 1310, volume 1904 cm^3
S1010 area 1430, volume 1732 cm^3
S1020 area 2013, volume 4161 cm^3

« Last Edit: December 16, 2019, 04:19:42 AM by Admin »

toejammer2

  • Malibu Status
  • **
  • Posts: 90
    • View Profile
2020 Axis foils
« Reply #101 on: December 20, 2019, 03:16:57 PM »
Ready to get into Axis foils for winging-1000 and 1020 wings etc. Just wondering if I should wait for the new stuff  i.e. carbon masts to come out. I emailed live2kite but they never answered back.
Also, anyone know if all of the mast sizes will come out in carbon?  I willing to gamble the money on a 48 cm beginner mast to see if I can supfoil some luscious insiders at our beach break without breaking my face.

I’ve been using my Kai and Iwa with my floaty but heavy 8’ hypernut. I’m going to start using my 7’4 carbon hypernut and my 6’6” Kalama when I feel more confident with the wing.

4.2 Fone,5.0 Fone and 7m Gong
Weight: 190
Cheers

Dwight (DW)

  • Cortez Bank Status
  • *****
  • Posts: 4780
    • View Profile
    • supSURFmachines
Re: 2020 Axis foils
« Reply #102 on: December 20, 2019, 03:33:52 PM »
There is no reason to wait. 1000 and 1020 are the same for 2020.

They are already supplying the 2020 short fuselage with all orders. That’s what you need, should you decide to go carbon someday. I’m not going carbon.

Mast is the same for 2020 in the aluminum.

You don’t need a short mast for shore break. You ride high on foil in the shallows, then kick the board airborne on exit. Pretty easy to execute.
« Last Edit: December 20, 2019, 03:36:03 PM by Dwight (DW) »

Admin

  • Administrator
  • Cortez Bank Status
  • *****
  • Posts: 6443
    • View Profile
    • StandUpZone
    • Email
Re: 2020 Axis foils
« Reply #103 on: December 21, 2019, 02:12:06 AM »
Also, anyone know if all of the mast sizes will come out in carbon?

When we ordered the Carbon 76 masts Axis had written, "sizing will start with the 76cm at $788 and 96cm at $857 and then later in 2020 will come out with the 86cm and 106cm."

Paddle On

  • Rincon Status
  • ***
  • Posts: 131
    • View Profile
Re: 2020 Axis foils
« Reply #104 on: January 03, 2020, 08:36:13 AM »
I bought a full kit from Live2Kite. For me as a beginner, it was recommended I get the Aluminum $100 mast as opposed to the $800 carbon. He said in order to get the stiffness the carbon mast would only be 15% lighter and I would never be able to tell the difference for a while. I also got the Axis 7'6" Carbon board. I have not had much time on it and am now injured and out for the next month or two so no report.
Paddle On 6'1", 215lbs - Portal Barra 7.11, Infinity 8.2 RNB, Portal Phantom 8.3, Infinity B-line 8.5, Infinity 10.0 New Deal, Sunova 11.0 Style, Starboard 9.0 Hero, Black Project Surge Paddle

 


* Recent Posts

post Re: GPT 5, Sam Altman, What's coming
[Random]
PonoBill
March 17, 2024, 05:30:44 PM
post Re: 2024 North Mode Pro wings:
[Classifieds]
cnski
March 17, 2024, 05:09:04 PM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
burchas
March 17, 2024, 08:50:00 AM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
Night Wing
March 16, 2024, 07:02:05 PM
post Re: HOT Chicks on Stand Up Paddle Boards!
[SUP General]
blueplanetsurf
March 16, 2024, 03:28:57 PM
post Re: GPT 5, Sam Altman, What's coming
[Random]
LaPerouseBay
March 14, 2024, 12:38:42 PM
post Re: GPT 5, Sam Altman, What's coming
[Random]
LaPerouseBay
March 13, 2024, 07:59:28 PM
post Re: FS - Ocean Rodeo Glide A-Series Wings (3m/ 4m / 5m), USA
[Classifieds]
StellaBlu
March 12, 2024, 07:27:21 AM
post FS - Kalama Barracuda
[Classifieds]
VB_Foil
March 11, 2024, 05:43:58 PM
post Re: Vision Pro
[Random]
Bean
March 11, 2024, 03:46:42 PM
post Re: Vision Pro
[Random]
PonoBill
March 09, 2024, 11:06:32 AM
post Happy International Women's Day, lady zoners!
[General Discussion]
LaPerouseBay
March 08, 2024, 07:28:47 PM
post Re: Vision Pro
[Random]
Admin
March 08, 2024, 04:45:53 AM
post Re: Vision Pro
[Random]
PonoBill
March 06, 2024, 11:00:24 PM
post Re: Vision Pro
[Random]
Admin
March 06, 2024, 10:15:55 AM
SimplePortal 2.3.7 © 2008-2024, SimplePortal