Author Topic: Mr. Fugly gets Tracks and other stuff  (Read 905 times)

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 22612
    • View Profile
    • Ponohouse is for sale. Great house but it's time for new adventures
Mr. Fugly gets Tracks and other stuff
« on: May 22, 2019, 01:58:36 PM »
I added tracks to the existing Tuttle box on Mr. Fugly so I can use the Axis foil plate mount. I also have the Axis tuttle adapter, but I figured it might be nice to try some adjustability. In the process I learned something new. I was going to just add mast tracks, but when I went by Chinook to pick them up one of the guys said most board makers are using the 10 inch fin box instead of a mast track. The fin box has the entry slot for the T-nut in the middle, which gives a little more adjustment and no chance of popping out the nut if the plate is adjusted to near the end of the track. Furthermore, the fin boxes are a little stouter--both a little deeper and thicker walled. I didn't realize that.

Chinook can't keep the 10" fin boxes in stock, so it's fortunate that I went by. They were just finishing a manufacturing run and I got four that I had to wait a few minutes for because they weren't quite finished. Good timing.



« Last Edit: May 22, 2019, 02:01:25 PM by PonoBill »
Ponohouse is for sale: http://www.ponohouse.com
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

Beasho

  • Cortez Bank Status
  • *****
  • Posts: 2322
    • View Profile
Re: Mr. Fugly gets Tracks and other stuff
« Reply #1 on: May 22, 2019, 02:09:16 PM »
Can you share how you installed them?

This should be a good test for a 'custom' installation of tracks. 

As you know I am sour on tracks having witnessed so many rip out.  I suspect you reinforced them with something.

All ideas and photos appreciated.  Nature, the Columbia River and 16 to 17 stones will work through the hypotheticals. 
« Last Edit: May 22, 2019, 02:11:31 PM by Beasho »

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 22612
    • View Profile
    • Ponohouse is for sale. Great house but it's time for new adventures
Re: Mr. Fugly gets Tracks and other stuff
« Reply #2 on: May 23, 2019, 11:53:44 AM »
Actually, no. The block of PVC that the tuttle is embedded in overlapped the slots by about a half inch. I had plasnned to make half-cassettes but elected instead to just gorilla glue the tracks in place, relying on the connection to the tuttle block for reinforcement. Then I lapped a sunstantially bigger piece of carbon over everything with a layer of 6oz satin glass as a sanding layer. I think the combination of existing carbon, the PVC box, and a bigger second lap of carbon is sufficient. We'll see.
Ponohouse is for sale: http://www.ponohouse.com
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 22612
    • View Profile
    • Ponohouse is for sale. Great house but it's time for new adventures
Re: Mr. Fugly gets Tracks and other stuff
« Reply #3 on: May 23, 2019, 05:18:58 PM »
Mr. Fugly styling both the tuttle adapter and the plate mounts. Here's a little quiz. What's wrong with the first picture. Besides my shop looking like it was ransacked.



Ponohouse is for sale: http://www.ponohouse.com
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

comeu

  • Rincon Status
  • ***
  • Posts: 150
    • View Profile
    • Email
Re: Mr. Fugly gets Tracks and other stuff
« Reply #4 on: May 24, 2019, 02:23:05 AM »
Easy, you mounted the foil the wrong way, it should be bellow the board and not on top of it, right.
You should open a Ponomuseum!

Newps

  • Sunset Status
  • ****
  • Posts: 273
    • View Profile
Re: Mr. Fugly gets Tracks and other stuff
« Reply #5 on: May 26, 2019, 09:32:19 AM »
Dear lord I love your garage, so many fun projects to work on.  Of course there lies the problem.....which one?
L41 SIMSUP S4 - 7'4" x 30 1/4" x 4 1/2" 112L
L41 SIMSUP S5 - 7'6" x 27 1/2" x 4 3/16" 106L
L41 SIMSUP S4 - 7'8" x 31"x 4 1/2" 122L - Modded w/ a King's TUT Tuttle box and using a King's foil.
L41 SIMSUP S4 - 7'10" x 30 1/4" x 4 1/2" 120L
Starboard Whopper - 10' x 34" x 4 1/3" 171L - w/ FCS GL-1 fins

 


* Recent Topics

topic Flying with one hand OFF the paddle
[Foil SUP]
Dwight (DW)
Today at 04:39:55 AM
topic Just got my NAISH wing
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
DavidJohn
Today at 03:43:17 AM
topic Cover songs.
[Random]
Cardiff Sweeper
Today at 12:34:19 AM
topic fairing my gofoil GL210
[Foil SUP]
jondrums
September 18, 2019, 11:46:39 PM
topic GoFoil 1.5 Release
[Foil SUP]
jondrums
September 18, 2019, 11:33:18 PM
topic How big is Amazon? How big will it become?
[Random]
PonoBill
September 18, 2019, 07:21:50 PM
topic Riding SHORT Foil SUPs
[Foil SUP]
JEG
September 18, 2019, 03:41:48 PM
topic Go Foil Advise
[Foil SUP]
JEG
September 18, 2019, 03:39:49 PM
topic The Cardiff Sessions
[Sessions]
808sup
September 18, 2019, 03:12:24 PM
topic genration boards - Sunova Poynter Hughes
[Gear Talk]
supthecreek
September 18, 2019, 12:59:46 PM
topic 3 nice sessions on 12 ft Sunova Point Break
[General Discussion]
Andy Pon
September 18, 2019, 12:55:44 PM
topic Humberto
[General Discussion]
eastbound
September 18, 2019, 12:21:17 PM
topic SAD NEWS--Sunny Garcia
[General Discussion]
Weasels wake
September 18, 2019, 10:17:46 AM
topic Any new waist leash ideas/thoughts?
[Gear Talk]
linter
September 18, 2019, 10:05:21 AM
topic Ozone 4m WASP wind wing
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Wetstuff
September 18, 2019, 08:48:30 AM