Author Topic: NSI stick on foot inserts  (Read 1670 times)

supfoo

  • Rincon Status
  • ***
  • Posts: 139
    • View Profile
NSI stick on foot inserts
« on: April 09, 2019, 11:52:56 AM »
HI, Has anyone used the NSI stick on surface mount foot strap inserts?? Was looking to put these on for my SUP foil, worried they are going to come right off.

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 25864
    • View Profile
Re: NSI stick on foot inserts
« Reply #1 on: April 09, 2019, 12:20:09 PM »
Lots of people use them. They have to be applied to very clean, smooth fiberglass. The trick is to clean the area with very fine sandpaper--as fine as you can get, a rough surface is bad, a dirty surface is worse--clean with alcohol and let dry, then stick them EXACTLY where you want them with 20 pounds of weight on them. Leave them overnight. You won't be able to remove them without damaging the surface if you do all that. The adhesive strength more than doubles
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

supfoo

  • Rincon Status
  • ***
  • Posts: 139
    • View Profile
Re: NSI stick on foot inserts
« Reply #2 on: April 09, 2019, 12:40:17 PM »
Thanks PB! :)

 


SimplePortal 2.3.7 © 2008-2024, SimplePortal