Author Topic: How to clean fouled adhesive on a new deck pad?  (Read 2031 times)

Zooport

  • Cortez Bank Status
  • *****
  • Posts: 3533
    • View Profile
    • Email
How to clean fouled adhesive on a new deck pad?
« on: February 25, 2015, 08:08:48 PM »
I was just looking over the new deck pad that I intend to put on my board that SupSports is making me and find that the covering has come off of part of the adhesive on the deck pad.  Dirt has gotten on there and it has lost much of it's stickiness.  Is there a way to get it clean and sticky again?  If I can't, I may just have to use contact cement on that spot. 

8'6 Soul Compass
9'1 Sunova Creek
9'6 WaveStorm SUP
9'8 Starboard Element

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 25864
    • View Profile
Re: How to clean fouled adhesive on a new deck pad?
« Reply #1 on: February 25, 2015, 08:51:29 PM »
Clean it up with Goof Off and use contact cement or 3M spray.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

Caribsurf

  • Teahupoo Status
  • ******
  • Posts: 1955
    • View Profile
    • Email
Re: How to clean fouled adhesive on a new deck pad?
« Reply #2 on: February 26, 2015, 07:28:03 AM »
I used goof off and a paint scraper and once all the old glue was scraped away, I cleaned the deck a few times with alcohol
Hobie Raw 8'10"
Jimmy Lewis Kwad 8'7"
Naish Hover 95 liter 5'7"
F-One Rocket foil board 5'5" 90 liters
Fanatic Aero 1250, 1500, 1750 HA foils
CabrinhaMantis 3.5, 4m 5m. F-One Strike 7m CWC
Hobie 14' race board

Sup-position

  • Cortez Bank Status
  • *****
  • Posts: 2171
    • View Profile
    • Email
Re: How to clean fouled adhesive on a new deck pad?
« Reply #3 on: February 28, 2015, 02:33:31 PM »
Dap Weldwood Contact Adhesive..
Ralph
Sup-position
(714) 899-3020 call, Text or Message

Zooport

  • Cortez Bank Status
  • *****
  • Posts: 3533
    • View Profile
    • Email
Re: How to clean fouled adhesive on a new deck pad?
« Reply #4 on: February 28, 2015, 02:52:12 PM »
Dap Weldwood Contact Adhesive..

Yeah, look around and found we don't have any GoofOff.  Think I'll just scrape as much dirt off as possible and then use contact cement.  I have exactly the kind you are talking about. 
8'6 Soul Compass
9'1 Sunova Creek
9'6 WaveStorm SUP
9'8 Starboard Element

 


SimplePortal 2.3.7 © 2008-2024, SimplePortal