|
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - foililm
Pages: [1]
1
« on: August 12, 2022, 10:09:02 AM »
Bought a V2 so this one has to go. Wing is great shape, it has a few scratches. This was a great wing to learn on, really stable, not too fast, and carves through the waves. Asking $525. Not really interested in shipping. Wing is in Wilmington, NC. Thanks for reading.
2
« on: February 28, 2022, 09:41:44 AM »
I'm not very big, I weigh in at 69 Kg or so. I use an Armstrong 4.5 on most days when the wind is over 14ish. It's pretty grunty for it's size. Real has a video comparing 5m wings which may help with your decision.
3
« on: January 21, 2022, 12:55:08 PM »
I saw a used 1850 (not the A+) for sale on Real for $550 plus tax. I didn't pull the trigger and it's gone now, but does that seem like a fair price? I am on the look out if anyone is considering selling theirs...
4
« on: January 03, 2022, 04:37:13 AM »
So I shimmed the 300 with the +1 and it worked! I’m able to gybe through my turn without stalling. I’m going to try the 232 with the 0 shim next. Thanks for the suggestion. I did notice a vibration with the +1 shim, maybe because I’m going a bit faster? Nothing was loose and I wasn’t dragging anything.
5
« on: December 29, 2021, 01:35:18 PM »
Which aspect of jibing is making you struggle? It could be more of a subtle technique change than the tail choice holding you back.
I get mostly turned around, lose speed and then fall down in a big mess. I almost had it on my regular side but nope, big fail. I did notice the board’s nose would rise up so I started riding with both feet more forward to keep it level through the turn.
6
« on: December 29, 2021, 06:34:57 AM »
My setup: 1550 v1, 85 mast, cf300 with 0 shim. My mast is about a 1/2” back from forward. I’m wondering if I should shim the 300 with the +1 shim first or use the 232 with the 0 shim. Will the 232 help with connecting my gibes which I am still struggling with? If anybody has a similar experience I’d love to hear about it. Thanks!
7
« on: December 27, 2021, 10:15:03 AM »
South end Wrightsville Beach is really good on a SE.
8
« on: December 20, 2021, 12:08:14 PM »
Patrick. Is Kelly Park deep enough for any 85 cm mast? I went out front at Jetty Park today. Super fun! Shore break was very manageable
9
« on: December 19, 2021, 07:19:07 AM »
Thanks for the quick response. I’m camping in Jetty Park - very nice place
10
« on: December 19, 2021, 06:22:53 AM »
Hey that rhymes! I’m in the area for a few days. I winged at the slick yesterday and it was, bump bump bump on the bottom. Where do the locals go? Beautiful area btw, Even saw a launch last night- very cool.
11
« on: November 22, 2021, 07:37:39 AM »
I have a Switch surf wing that needs to go. I had fun using it to learn how to wing foil but it really is too big for me. Plenty of low end grunt and light for its size. Really easy water starts. It is in great condition - no tears, no repairs, and seams are tight. I just replaced the leading edge bladder and have a new spare for the strut. Wing comes with a wrist leash and backpack. I'm in Wilmington, NC. Local pickup only please. $450.
12
« on: October 18, 2021, 06:03:00 AM »
I ended up going to Canadian hole. There were about 10 wing foilers there and a bunch of windsurfers. It is a pretty small area but do-able. The north boundary is pretty evident at low tide. Wind was out of the SW gusting into the mid 20s. Two kiters decided to land their kites just north of the parking lot and got lots of stink eye from the windsurfers.
13
« on: October 12, 2021, 02:24:23 PM »
Thanks. We are staying in Waves. We were there in July and I kited north of that bridge just south of Jockey's Ridge at the public beach. It was fun but super shallow.
14
« on: October 12, 2021, 01:21:03 PM »
I've heard Canadian Hole is supposed to be deep enough for foiling. Can anyone verify this? Are there any other decent locations in the sound that are easy to access? I know Real has their "foil garden" but is it accessible if you aren't staying there? Thanks.
15
« on: August 09, 2021, 06:02:29 AM »
My first post here, so Hello! Growing up camping, we were taught to stuff our sleeping bags any which way back into their sacks rather than rolling them up neatly. It seems rolling tends to compact the insulating material inside which could affect its performance. With my wing, I tend to do the same - ball it up at the beach and then dry it flat when I get home by draping it over something so air gets underneath.
Pages: [1]
Recent Posts
|
Old video I made in 2017 wayyyy better with new music
[Flatwater and Touring]
|
deepmud Today at 09:14:48 PM
|
|
Re: Insta360 3x for Christmas
[Flatwater and Touring]
|
deepmud Today at 09:13:18 PM
|
|
Re: Axis Downwind Boards - inverse relationship of length/volume and width
[Foil SUP]
|
liv2surf Today at 06:59:12 PM
|
|
Re: Insta360 3x for Christmas
[Flatwater and Touring]
|
Dusk Patrol Today at 05:00:36 PM
|
|
Re: Insta360 3x for Christmas
[Flatwater and Touring]
|
deepmud Today at 11:05:05 AM
|
|
Re: New Starboard Sprint Airline Inflatables
[SUP General]
|
deepmud Today at 10:42:45 AM
|
|
Re: F4 freerace 1050 and 850 race foil 97 cm mast
[Classifieds]
|
Pjwing Today at 09:57:12 AM
|
|
Re: Progress, revelations and musings
[The Shape Shack]
|
Admin Today at 09:12:25 AM
|
|
GoFoil Tuttle v1.5 w/ plate adapter $600
[Classifieds]
|
rw2 Today at 08:31:52 AM
|
|
Re: Progress, revelations and musings
[The Shape Shack]
|
PonoBill Today at 07:25:36 AM
|
|
Re: New Cabrinha Mantis V3 and Vision
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
|
PonoBill Today at 07:20:06 AM
|
|
Re: Progress, revelations and musings
[The Shape Shack]
|
Admin Today at 01:01:28 AM
|
|
Re: Progress, revelations and musings
[The Shape Shack]
|
PonoBill March 27, 2023, 08:53:34 PM
|
|
Re: New Cabrinha Mantis V3 and Vision
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
|
surfcowboy March 27, 2023, 08:32:20 PM
|
|
Re: New Cabrinha Mantis V3 and Vision
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
|
surfcowboy March 27, 2023, 08:30:06 PM
|
Recent Topics
|
Old video I made in 2017 wayyyy better with new music
[Flatwater and Touring]
|
deepmud Today at 09:14:48 PM
|
|
Insta360 3x for Christmas
[Flatwater and Touring]
|
deepmud Today at 09:13:18 PM
|
|
Axis Downwind Boards - inverse relationship of length/volume and width
[Foil SUP]
|
liv2surf Today at 06:59:12 PM
|
|
New Starboard Sprint Airline Inflatables
[SUP General]
|
deepmud Today at 10:42:45 AM
|
|
F4 freerace 1050 and 850 race foil 97 cm mast
[Classifieds]
|
Pjwing Today at 09:57:12 AM
|
|
Progress, revelations and musings
[The Shape Shack]
|
Admin Today at 09:12:25 AM
|
|
GoFoil Tuttle v1.5 w/ plate adapter $600
[Classifieds]
|
rw2 Today at 08:31:52 AM
|
|
New Cabrinha Mantis V3 and Vision
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
|
PonoBill Today at 07:20:06 AM
|
|
Ultralight Board Designs
[The Shape Shack]
|
Beasho March 27, 2023, 06:28:02 PM
|
|
SIC Maui Okeanos, Bullet and Tao Air Inflatable boards on sale - up to $266 off
[SUP General]
|
Green Water Sports March 25, 2023, 09:34:31 AM
|
|
Red Paddle Co on sale - Save up to $440
[SUP General]
|
Green Water Sports March 25, 2023, 09:23:01 AM
|
|
SAAB foil -Complete or Components
[Classifieds]
|
Vancouver_foiler March 25, 2023, 09:09:25 AM
|
|
2023 New Wings Thread
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
|
deja vu March 24, 2023, 11:28:14 AM
|
|
SUP Surf Volume and Width - how much is too much?
[SUP General]
|
surlygringo March 23, 2023, 07:13:13 PM
|
|
Installing Chinook 16" boxes
[The Shape Shack]
|
clay March 23, 2023, 06:29:53 PM
|
|