Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - all~wet

Pages: [1]
1
Classifieds / Cedrus Carbon Mast + baseplate + adaptor $950 +ship
« on: October 04, 2022, 01:03:35 PM »
***SoCal local pickup or you pay shipping***

Cedrus Carbon Mast Wing Surf Foiling ($1000 value )
75cm = mast only  Equivalent to: 80cm/31.5" fully assembled

Includes:
• Baseplate ($120 value)
• 1 adaptor ($120 value)

You can order adaptors through Cedrus for any and all foil brands ($120)
https://projectcedrus.com/product/fuselage-adapters/

Or:
For additional $75 ea. ($120 value )
I have 1 adaptor available for: Axis, Lift, Mike's Labs

Instant gratification - Save time as there is often a wait-time for new ones and this one is good as new.
Excellent condition- only blemish is normal wear where baseplate screw/fastener point is

Excellent light, stiff carbon mast that adapts to any major foil brand. Future proof your gear- don't tie yourself down to one brand!

_________________________

from their website:

The mast that started it all, the Project Cedrus “Classic” is still exceeding industry benchmarks for stiffness and strength, while remaining one of the lightest and only truly universal foil masts on the market. Whether you want a stiffer mast for your favorite kitefoil, or just want to try as many wings as possible as you learn to prone foil, The Classic will grow with you. Pair it with our lightweight plate, and you’ll have the lightest set up at the beach. Go with the Strong Mount if you’re a wing-foiler, and don’t ever worry about bending your aluminum mast or breaking your carbon mast again. The Classic is available in lengths as short as 55cm up to 95cm (assembled) for the perfect prone, wing, and kite configuration.
Project Cedrus is the only fully custom hydrofoil mast available in lengths down to the inch, and as a result, will have varying lead times. Depending on seasonality, material availability, natural disasters (yes, fires and freezes affect production), and demand, it may take 4-8 weeks to assemble your custom length mast. We are working hard to increase production throughput but again these are handmade in the USA to your specifications and take time to build. Specifying your custom build is also very time-consuming, as we work together to determine mounts, adapters and compatibility, and stiffness/strength requirements. For this reason, full payment for Project Cedrus is now due upfront.

https://projectcedrus.com/shop-2/
______________________

2
Classifieds / Ozone Wasp 6.0 V1 $300 + ship
« on: September 19, 2022, 10:32:56 AM »
Condition: Good! w/ maybe 15x used, 1 small pro patch/repair-
BRAND NEW BLADDER JUST PRO INSTALLED!
Color: Green
Comes with: Original bag, leash, patch kit

Great economical way t get into the game.

Price:$300
Location: So Cal for pickup
Will ship- your cost.  Last time shipped wing was around $50

Transaction:  Will include phone call, exchange I.D./info w/  payment via sent PayPal CC invoice

3
Classifieds / Axis Wings- Bargain Blowout
« on: August 06, 2021, 04:15:25 PM »
Axis HydroFoil Wings

1000 HA: $300.00
900 HA: $300.00
860 SP : $300.00
750 Surf: $200.00

Local/ SoCal pickup or + $25 for shipping Cont. U.S.

Discount- for multiple:

$925 takes all
$825 for 3
$550 for 2

All are in good condition with superficial scratches and come with covers. These wings all fit the Axis S Series, Red Fuselages. Great quiver of foil wings to do it all Prone, SUP, Wind Winging and Pumping in all conditions. Axis foils are well built, very smoooooth, so great to learn with while still very high performance.

Info/new prices: https://axisfoils.com/collections/all-surf


1000 HA

The AXIS 1000mm Carbon Front wing is the bigger brother of the high aspect AXIS 900mm Carbon Front wing. Designed with Downwinding in mind, the 1000 has tremendous amount of glide, and only one speed setting - FAST.
The 1000 wing also works well on fast riding smaller bumps, as well as wingfoiling, SUP, Prone small day pumping


900 HA

The AXIS 900mm / 35.5” : wingspan Carbon Front wing is a higher aspect performance front wing for SUP, Surf, Wind, Downwind and Pump foiling. With a 1277cm2 surface this is very fast wing designed for the intermediate and advanced riders who are looking for stability in higher speeds. Also an amazing wing for wind foiling.


860 SP

The AXIS SP 860 / 34” wingspan Carbon front wing was designed with Performance Surf foiling in mind. As the larger size of the new Surf Performance wings, the 860 addresses the need of foil surfers for fast and loose turns on medium to small size waves.Ideal for:
Prone foiling medium / small waves
Kite Foiling freeride or waves in might or medium winds
SUP surfing
Wing surfing


750 Surf

The AXIS 750mm Carbon Front wing is perfect for your surf, sup, pump or wake foiling sessions. Compatible with AXIS SUP/Surf fuselage. Graphics on the wings give you all possible measurements so you can best compare and quickly swap pieces or get new accessories for your foil. Recommended use:
Medium/Large size wave SUP,
All size wave SURF, Tow-in,
Wake foiling,
Lightwind kite foiling / carving / surfing

_____________________________________

4
Classifieds / Axis Wings- 750 - 1000 - 400 stab
« on: December 03, 2020, 11:51:45 AM »
Axis Wings, all in good condition w/ covers
I am in Dana Point, CA
Local pickup / meet at SanO would be preferred, but I can ship.

1000 $350 + shipping

750: $300 + shipping

400 Stab  $75 + shipping

______________________________

Wing Specs

1000mm Carbon Wing

Technical Data:
MAX CHORD: 160mm
ACTUAL AREA 1388 square cm / 215 square inches
SPAN: 1000 mm / 39.5 inches
PROJECTED AREA: 1310 square cm / 203 square inches
VOLUME: 1904 cubic cm / 116 cubic inches

Recommended use:
Downwinding - High Performance / Pro / Lighter wind
SUP / Surf - High Performance / smaller waves
Windsurfing - Freeride / Easy ride

Suggested Rear Wing:

Rear Wing 500 Anhedral Carbon (Wind foiling)
Rear Wing 440 or 400 Carbon (High Performance Surf / Pro downwinding)
Rear Wing 370 for snappy turning and super loose riding


750mm Carbon Wing:

Technical Data
CHORD: 220mm
ACTUAL AREA 1359 square cm / 211 square inches
SPAN: 75 cm / 29.5 inches
PROJECTED AREA: 1272 square cm / 197 square inches
VOLUME: 2360 cubic cm / 144 cubic inches

Recommended use:
Medium/Large size wave SUP,
All size wave SURF, Tow-in,
Wake foiling,
Lightwind kite foiling / carving / surfing

Suggested Rear Wings:
Rear Wing 44cm Regular Carbon
Rear Wing 40cm Regular Carbon

5
Classifieds / SUP Foil Board- 6-10x28 117L $450.00
« on: February 19, 2019, 08:35:44 PM »
SUP Foil Board ~ Zoner Special $450.00 ~ So O.C., CA
Dims: 6-10"x28"x4.5". 117L
Production board shape by North Shore Oahu shaper Joe Demarco (https://www.demarcosurf.com)
Excellent condition- no dings
Has been a great board to learn on but- moving on to smaller custom board- good cheap opportunity for someone else to get started.

-Stable, paddles well
-Beveled Rails for turning
-Tuttle Box & Track Mounts fit any brand foil
-Foot-strap inserts multiple positions for adjustments on front/rear
-Kick-pad added over mast for foolproof foot orientation
-DaKine adjustable padded foot-strap included for front

Board is in excellent condition. Has been the perfect board to learn on. Very durable. I'm 6-3/200lbs and has plenty volume to spare and felt quite stable from day one. The added kick pad and front foot-strap make for rock solid, foolproof foot placement every time so you can concentrate on new skills of flying, trimming turning the foil.

Photos CL link:
https://orangecounty.craigslist.org/spo/d/dana-point-foil-sup-board-6-10x28-117l/6823457128.html

6
SUP General / Maui/Oahu board/OC1 storage
« on: April 14, 2015, 12:39:41 PM »
I am in the process of unplugging here and negotiating a move to the islands... have flexibility with work, so I am considering Kailua/Oahu and/or Maui- leaning toward Maui.  Step one in the transition is likely going to be a small apartment/studio with minimal storage, so I anticipate I'll need storage for an OC1 to be shipped and a downwind board hopefully to be acquired on arrival.

Anyone know of reasonable/practical options? 
Suggestions for rental properties for 1?
ANY suggestions for a transplant.

Thanks in advance!!!!

7
Gear Talk / Nectar Cinco 9-6
« on: April 21, 2012, 09:13:59 PM »
Anyone w/ insight / input / anyone has regarding a Gary McNab shaped Nectar Cinco 9-6 would be great.  Thinking for use as an everyday board / first step down board PSH from a 10-6 for someone 6-3 205 in SoCal conditions.  Knowing the shaper's rep for surfboards, I have to imagine it surfs well... just wondering about its characteristics paddling into waves, stability/suitability in everyday conditions/chop/mush.  Ran into a used one and am thinking.... Thanks!

Pages: [1]

SimplePortal 2.3.7 © 2008-2024, SimplePortal