Standup Zone Forum
General => The Shape Shack => Topic started by: Airfoil on September 26, 2021, 08:05:19 PM
-
So far I love the kit. Youre on your own for the skins either build in strips or laminate on a workbench and then glue it down in one piece. I have a 7 1/2 inch fin box but they call for 10 not sure why would that be a concern? I am planning to start resawing and ripping strips from 12 foot two by sixes sold at Home Depot $50 a piece for (http://[img][url=http://[url=http://][url]]][url][/url][/url])[/img]beautiful Cedar
-
Looks like a fun project. Try and rip the cedar thin as will work to keep the weight down. When building a paddleboard, going as light as possible is always shoot for.
-
Looking good!
Only reason to go for a 10" box is to give you options later. If you're happy with the shorter, you'll be fine.
I would echo the view to go as thin as possible. You can always glass the inside for more strength if needed. I had my first board on the thicker end, thinking I could sand it down thinner but didn't. It ended up a fair old weight!