Standup Zone Forum
The Foil Zone => Foil SUP => Topic started by: steamroller on July 20, 2019, 01:31:05 AM
-
(https://farm66.staticflickr.com/65535/48326228847_8d3c6bbd77_z.jpg)
(https://farm66.staticflickr.com/65535/48326230497_2dd2a58db4_z.jpg)
(https://farm66.staticflickr.com/65535/48326100786_72a892747f_z.jpg)
(https://farm66.staticflickr.com/65535/48326099021_a245c65b6a_z.jpg)
(https://farm66.staticflickr.com/65535/48326230117_1d9b326771_z.jpg)
-
Hi steamroller. Thanks for the extra pics. One more question, is the underside of the wing concave or convex. Difficult to see from the pics. Only asking as I am in the process of making my own GL style ply wing ;D
-
Convex and concave from pics I've seen. Look at the H 105 wing profile. or the NACA 63-412 or NACA 64a210(130% increase in thickness). While I can not be sure since I have not held any of these wings, this is only my best guess. I am currently using the H 105 hydroplane profile designed by Tom Speers specifically for lower speed sailing dingies. We will see. Maybe a couple weeks before it is finished.
-
Convex and concave from pics I've seen. Look at the H 105 wing profile. or the NACA 63-412 or NACA 64a210(130% increase in thickness). While I can not be sure since I have not held any of these wings, this is only my best guess. I am currently using the H 105 hydroplane profile designed by Tom Speers specifically for lower speed sailing dingies. We will see. Maybe a couple weeks before it is finished.
Looking forward to getting an update ;)
-
which tail is shown - wide or narrow? thank you for the photos. PS. I like your cut maliko tail