Standup Zone Forum

General => The Shape Shack => Topic started by: Wetstuff on May 27, 2019, 10:21:26 AM

Title: UV clear coating...
Post by: Wetstuff on May 27, 2019, 10:21:26 AM: I was looking for some vinyl screen ink solvent and noticed this item that may be helpful to use-guyz.

https://www.nazdar.com/en-us/P/4319/Nazkote-RA1500-UV-Premium-Satin-Roller-Coat-Clear

Jim
Title: Re: UV clear coating...
Post by: TallDude on May 31, 2019, 02:29:56 PM: I read through the spec's. It looks tricky to use. Can't expose it to any UV light while applying it or even just storing it. Seams like it's just made for coating printed ink objects. Hobie used satin and glossy concrete sealer on most of their race boards, and I've used it on a few of my boards. It bonds well, and is easy to apply.
Title: Re: UV clear coating...
Post by: PonoBill on May 31, 2019, 10:42:41 PM: Yeah, no. Any poly-based crap will block UV. It's what it does. Concrete sealer is probably fine, but rattle can Rustoleum clear in gloss, satin and matte is a killer product.
Title: Re: UV clear coating...
Post by: Surfside on June 01, 2019, 03:15:14 AM: Quote from: PonoBill on May 31, 2019, 10:42:41 PM
Yeah, no. Any poly-based crap will block UV. It's what it does. Concrete sealer is probably fine, but rattle can Rustoleum clear in gloss, satin and matte is a killer product.

Thanks PB! Almost finished with my 6' mini barge and I'll have to give it a coat of Rustoleum clear before the Speed spray. BTW, their white primer works great! Does not chip when you strike it with the paddle.