Standup Zone Forum
The Foil Zone => Wingsurfing, Windfoiling, Wingfoiling, Wing SUP => Topic started by: SUPeter on April 16, 2019, 05:14:22 AM
-
I have many old kitesurfing kites and am plan on cutting them up to fabricate a kite wing based upon Duotone, Ozone, and or Naish kitewing types. Any information to add to the current brain storm in my head would be appreciated. That just looks like the perfect tool for Maine, where the beaches are few and the winds are many.
-
https://www.instagram.com/p/BwP5y-Zn2eA/?utm_source=ig_share_sheet&igshid=u79os2hej4zr
-
Cool! Thanks! I forgot to mention that the leading edge and center strut must be inflatable though I've seen several videos of framed kite wings being used in water. Just thought the inflatables would be safer and easier to get up and flying. The whole rigmarole of laying out a kite and strings and launching the thing up here in down east Maine just makes this hand held rig look so much easier. Down wind foiling would be so much less of a hassle: being able to sail back upwind would eliminate the need for a shuttle. I plan on restructuring the leading inflatable tube so that both wing sweep and dihedral exist, leaving a very large diameter tube to curve back gradually to the tips.
-
We used to gun hills on a skateboard and carry a thin piece of plywood (maybe 3' x 4' ) for an air brake. We drilled holes and looped rope through it.
-
Now if only I had enough wind. tried it in 12 knots, not quite enough. Approx. 3.5 sq meters.
-
Another pic
-
Congrats!
Looks fantastic. Keep us updated!
Cheers
-
Nice job. I keep looking at my kites and my sewing machine. But I got a 4M today so it's off to the races.