Wanted a handle on the bottom of my foilboard - got a gore breather handle

[jondrums]

Should I be worried about the breather being on the bottom side of the board?   Not what I would have asked for, but that's what the board guy installed.  Never thought to clarify

[jrandy]

Probably OK, kinda like duck-diving or falling off and flipping (more my style) a board with it on the top.

The Gore membrane should only allow vapor through and not drops.

I would ask the shaper and/or confirm that it was installed to actually breath (hole drilled under vent plug through the main handle if it is the removable kind).

[Dwight (DW)]

The potential issue with those FCS handles, is your finger breaking the fragile cap off the gore vent.

They break super easy. That's why so many shapers use the handle, but not the vent.

Casica Engineering (the company most US shapers use) switched to Donaldson gore breathers. These are way more durable.

[PonoBill]

If you do it again, consider a bridged handle. Awesome on the bottom of a board.