Author Topic: Quick release dual track and pedestal  (Read 1155 times)

JEG

  • Teahupoo Status
  • ******
  • Posts: 1012
    • View Profile
    • Email
Quick release dual track and pedestal
« on: February 12, 2020, 08:53:44 PM »
Interesting idea of the quick release dual track plate mount. Also, looks like they make an aftermarket gofoil pedestal and probably an option of short and long fuselage bolt mount.


Dwight (DW)

  • Cortez Bank Status
  • *****
  • Posts: 3623
    • View Profile
    • supSURFmachines
Re: Quick release dual track and pedestal
« Reply #1 on: February 13, 2020, 01:56:59 AM »
Knowing a guy a who had T-nuts (with their large surface area compared to a silly dowel pin) break out of the tracks in his production windsurf foilboard.....hell no to that contraption.

JEG

  • Teahupoo Status
  • ******
  • Posts: 1012
    • View Profile
    • Email
Re: Quick release dual track and pedestal
« Reply #2 on: February 13, 2020, 12:47:18 PM »
yeah, I'm guessing its okay to use quick release on single sup surf fin but there's a lot of pressure/force on that foil mount area though we dont know until we try. Who's here the the test dummies  8)

Beasho

  • Cortez Bank Status
  • *****
  • Posts: 2447
    • View Profile
Re: Quick release dual track and pedestal
« Reply #3 on: February 13, 2020, 01:23:31 PM »
Weight matters on these foil boards.

1) I have never met a dual track system that hasn't broken (No offense DW I think yours would hold up)
2) They may be fine for lighter boards and smaller conditions

You want it all to be LIGHT.  This thing would add undue weight and risk.

Might end up like this:


clay

  • Peahi Status
  • *****
  • Posts: 803
    • View Profile
    • www.clayisland.com
    • Email
Re: Quick release dual track and pedestal
« Reply #4 on: February 13, 2020, 02:46:23 PM »
Grant is solid guy and rips on all craft.

He's super creative and continually coming up with innovative designs, I can't wait to see what he comes up with next.
Aloha, I welcome and appreciate all responses of positivity and good feeling.

YouTube: https://www.youtube.com/channel/UCOIE6FWr1SpWvbPJIIiEgog

SanoSlatchSup

  • Peahi Status
  • *****
  • Posts: 948
  • San Clemente
    • View Profile
Re: Quick release dual track and pedestal
« Reply #5 on: February 13, 2020, 11:05:09 PM »
I must be missing something...what prevents them from sliding forward and/or backwards in the track during use?  ???
Me: 6'1"/200...6'0" Chelu Foil Boards...9'6" Bob Pearson "Laird Noserider"...9'6" Costa Azul Wide Body...14' Lahui Kai "Manta"...8'0" WaveStorm for when proning urges still hit, and 7'3" Chuck Glynn foil board backup.

surfcowboy

  • Cortez Bank Status
  • *****
  • Posts: 3726
    • View Profile
Re: Quick release dual track and pedestal
« Reply #6 on: February 14, 2020, 09:24:22 AM »
The weight of the board and the upward pressure of the foil. Itís really ingenious if you watch his videos.

It hinges back, not forward, so your entire weight is holding it in.

If you hit a rock, it can swing back, but the pins keep the foil in the tracks so you keep your foil.

It actually protects your tracks in that way. A hard hit can release. But once you see it work I think youíll agree that thereís no way youíd knock this loose other than an aerial, which he recommends you donít do.

For a weekend warrior this seems pretty great and hes selling a bunch so if it is a dud you will hear about it. So far nothing on social media that says anything bad.

Solent Foiler

  • Waikiki Status
  • *
  • Posts: 20
    • View Profile
    • Email
Re: Quick release dual track and pedestal
« Reply #7 on: February 14, 2020, 11:35:56 AM »
I must admit I'm a bit surprised that there aren't more quick release type systems. I've got the Naish Abracadabra mast plate system and it's fantastic.

Sure it saves a bit of time and effort (which for me with 2 small kids maximises foil time) but the real win is packing up with cold claw hands. Anything that reduces fiddling with small parts in UK winter gets a big 👍from me.
I'm 5'10", 65kg riding:
Naish Hover Crossover 120
Gong Catch 5'3"
on Naish foils (1250 & 1650).

Fishman

  • Sunset Status
  • ****
  • Posts: 347
    • View Profile
    • Email
Re: Quick release dual track and pedestal
« Reply #8 on: February 14, 2020, 05:57:05 PM »
It looks like it could have a place. I can see this working good for wing-foiling, Down-winding maybe even wake foiling (non jumping of course), as long as you can physically reinstall it in deep water could be a nice option.

Any idea what it cost?

Probably wouldn't use it in surf of any size. Getting caught inside may be a issue if the white water makes it release to the folded position, add some more white water to the folded out foil and...
SupSurfMachine 9'9" longboard
SupSurfMachine  8'2" funboard

surfcowboy

  • Cortez Bank Status
  • *****
  • Posts: 3726
    • View Profile
Re: Quick release dual track and pedestal
« Reply #9 on: February 14, 2020, 06:29:21 PM »
$50 and itís tested in the surf in Santa Cruz. Check him on Instagram. Tons of videos.

Itís actually made so you can adjust your foil in the surf between waves without a screwdriver stabbing you in your pocket. Hope someone on here grabs one to test before everyone declares it unworkable before they actually see or use one lol.

If you worry about it pulling back from drag you have to remember that the second you have forward motion to create drag, you also have lift/pressure to counter it.

norcom

  • Malibu Status
  • **
  • Posts: 71
    • View Profile
Re: Quick release dual track and pedestal
« Reply #10 on: February 14, 2020, 06:52:38 PM »
Interesting. Iím currently using the Noir Matter quick flight system when bringing the foil on a jet ski. The quick release option is nice but I would still feel more comfortable with a screw. What about using the tail mount slides like this new system and have two standard T nuts in the front? Or maybe even just one.

SanoSlatchSup

  • Peahi Status
  • *****
  • Posts: 948
  • San Clemente
    • View Profile
Re: Quick release dual track and pedestal
« Reply #11 on: February 15, 2020, 08:08:22 AM »
Got it now...certainly an interesting concept. Like his inventor's spirit when it comes to trying to improve on the foiling game...some cool ideas.

https://www.instagram.com/tv/B4AogTknwr-/?utm_source=ig_web_copy_link
Me: 6'1"/200...6'0" Chelu Foil Boards...9'6" Bob Pearson "Laird Noserider"...9'6" Costa Azul Wide Body...14' Lahui Kai "Manta"...8'0" WaveStorm for when proning urges still hit, and 7'3" Chuck Glynn foil board backup.

Beasho

  • Cortez Bank Status
  • *****
  • Posts: 2447
    • View Profile
Re: Quick release dual track and pedestal
« Reply #12 on: February 15, 2020, 08:18:24 AM »
Upon further inspection the simplicity of this device is appealing.

https://www.youtube.com/watch?v=9PmepWFKpUA&feature=youtu.be

JEG

  • Teahupoo Status
  • ******
  • Posts: 1012
    • View Profile
    • Email
Re: Quick release dual track and pedestal
« Reply #13 on: February 15, 2020, 12:24:14 PM »
I like that drop in both/nut set to dual track  8)

PonoBill

  • Cortez Bank Status
  • *****
  • Posts: 23035
    • View Profile
Re: Quick release dual track and pedestal
« Reply #14 on: February 15, 2020, 07:16:35 PM »
Yup, I like it, I'm going to get one.
Foote 10'4X34", SIC 17.5 V1 hollow and an EPS one in Hood River. Foote 9'0" x 31", L41 8'8", 18' Speedboard, etc. etc.

 


* Recent Posts

post Re: Axis Foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Dwight (DW)
Today at 01:44:56 PM
post Re: New Naish S25 Wing-Surfer
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Quickbeam
Today at 01:21:57 PM
post Re: 2020 Axis foils
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Rastaman3030
Today at 01:09:27 PM
post Re: Hi all, - could you help me fill in a quick survey about your SUP race board ?
[Downwind and Racing]
gzasinets
Today at 12:03:02 PM
post Re: Hi all, - could you help me fill in a quick survey about your SUP race board ?
[Downwind and Racing]
TallDude
Today at 11:02:37 AM
post From light wind to smoking in 4 hours
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
PonoBill
Today at 10:16:58 AM
post Re: New Naish S25 Wing-Surfer
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
PonoBill
Today at 10:14:45 AM
post Re: Hi all, - could you help me fill in a quick survey about your SUP race board ?
[Downwind and Racing]
Bean
Today at 06:28:28 AM
post Hi all, - could you help me fill in a quick survey about your SUP race board ?
[Downwind and Racing]
ukgm
Today at 05:50:21 AM
post Gong XL Pro front wing, 55cm Surf stabilizer
[Classifieds]
Thatspec
Today at 02:17:26 AM
post Re: Greece Downwind Surfing Summer 2019
[Downwind and Racing]
dk78
Today at 12:22:42 AM
post Re: Anyone riding Naish Hokua or Mad Dog?
[Gear Talk]
Hail SUPin
February 19, 2020, 02:57:24 PM
post Re: New Naish S25 Wing-Surfer
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Dwight (DW)
February 19, 2020, 01:41:22 PM
post Re: Anyone riding Naish Hokua or Mad Dog?
[Gear Talk]
805StandUp
February 19, 2020, 01:40:21 PM
post Re: wind wing industry is growing
[Wingsurfing, Windfoiling, Wingfoiling, Wing SUP]
Admin
February 19, 2020, 01:25:32 PM

* Recent Topics