Longboard SUP fin box types

[WinslowPaddler]

Hi,

I just bought a fin that I found to be too small and wiggled a bit in the fin box of my Naish.  It fits fine in my other board which has a standard US longboard fin box. My question is, do different manufacturers have different size fin boxes?

Thanks

[Fanman]

Some times you have to sand them down a bit to fit and some time you have to add some tape to taKe up the slack, masking, duct etc. or use a little Solarez type sun cure epoxy dabbed on there and sand it a bit after it cures until its fairly tight! Those are a couple of quick fixes.
GOOD LUCK!

[JimK]

Go with the tape it works best and you'll be able to remove it so you can use the fin on your naish

JimK
www.extremewindsurfing.com